If every one of the connections to your DVD drive are safe, then it’s feasible that the board from the DVD drive has a brief inside it or even a blown surface-mount fuse. Take away the DVD drive and change it with an one that is new see if that really works. If it can, you are able to either change the whole drive, or look for an upgraded board.
Then it may be a bad motherboard if the cables and the drive are not the problem that cause the DVD drive not to turn on. It is hard to try this without receiving a motherboard that is new testing your DVD drive on a known working console. In the event that drive nevertheless deals with another board, you will need certainly to change the motherboard.
DVD drive shall perhaps perhaps perhaps not read discs. The drive takes discs, but doesn’t read them
Bad information cable
Then there may be a bad connection with the data cable if the disc is spinning in the DVD drive, but the console can’t read it. The cable is a ZIF ribbon cable that goes through the DVD drive to the mom board. First, eliminate the DVD drive to there check the connection. Whether or not it’s fine, you need to access the bond in the motherboard to be sure additionally it is protected. At this time, in the event that connections are fine, you can also want to try a new information cable, though it’s not most likely that the cable may be the issue unless there clearly was obvious problems for it.
Bad laser lens
Then there is likely a problem with the laser lens in the DVD drive if the Wii takes discs, but cannot read them. Continue reading “Bad DVD drive board. Changing the board will be less costly, but will demand soldering.”